Revere Ware Handles

Revere Ware Handles

Best Deals For Revere Ware Handles at NextDealAddict.com

Compare now 99 Revere Ware Handles on Next Deal Addict and find current offers with low prices - Last Checked Shopping Results on November 13, 2018

NextDealAddict applies the smartest e-commerce technology to make the consumer shopping experience easy, efficient and fun: find the ideal price for Revere Ware Handles at the most trusted online store.

  • Replacement Handle Pair for Revere Ware Pots/Dutch Ovens (Single Screw) (Revere Handles Ware) BUY NOW

    Replacement Handle Pair for Revere Ware Pots/Dutch Ovens (Single

    These are replacement handles for newer era (post 1968) Revere Ware pots and Dutch ovens (the ones with one screw per handle that screw directly at a 90 degree angle into the side of the pot). These handles are not made for, and will not fit any other model of Revere Ware pots, or pots from any other maker.These parts are newly manufactured and are made to look and work just like original Revere Ware pot handles. Material: Bakelite, stainless steel Includes: Each handle includes two handle halves + two screws. Each order includes two handles, enough for one pot. Measurements: Approximately 3.0 in (75.5 mm) x 1.25 (32 mm) x 1.5 in in (38 mm) Fits: Newer era pots and Dutch ovens that use a single screw only, that screws at a 90 degree angle into a bracket on the side of the pot. If your pot handles look like these, they should fit. Replaces: The original Revere part number for this part was 36134. Part Notes The screws included with these handles are Phillips head, not slotted like some of the original Revere Ware pot handle screws were. Because the original slot head screws strip very easily, we consider this an improvement. Bakelite notes Because Bakelite is somewhat brittle, over tightening can cause the Bakelite to crack. Use caution when tightening. These handles (and Bakelite...

  • Color: Black
  • Brand: RevereWareParts.com
  • ASIN: B002UM6NMU
  • UPC: 898746002125
  • Medium 2-screw replacement handle for vintage Revere Ware pans (Revere Ware Handles) BUY NOW

    Medium 2-screw replacement handle for vintage Revere Ware

    These are newly manufactured medium size replacement handles for vintage era 2-screw Revere Ware pans. Material: Bakelite, stainless steel Includes: Two handle halves + hardware set Measurements: 4.6 in (117 mm) long, 2.6 in (66mm) between holes on center. How to fit: Make sure your sauce pan or skillet has a 5/8 inch tall metal spline, and has approximately 2.6 inches between the centers of the screw holes. If you have a 3/4" spline you need the large or x-large size, not this one. For a 3/8" spline height, you need the small handle. These work with Revere Ware pans with handles that have two screws through the Bakelite. Hardware Notes The screws in the hardware set are Phillips head, not slotted like the original Revere Ware screw sets were. Because the original slot head screws strip very easily, we consider this an improvement. Bakelite Notes Bakelite is a great heat resistant material, but it can be a bit brittle. The most important thing is to not over tighten the screws when assembling the pan handle or you can crack the handle. These parts are not oven-safe. Washing in a dishwasher may dull the finish over time. Installation Notes We have seen about 5% of handles where the screw holes are off just enough to make it very hard to get the nuts to go all the way thr...

  • Color: Black
  • Brand: RevereWareParts.com
  • ASIN: B001TZ762U
  • UPC: 898746002033
  • Revere Replacement Lid Knob for Ware Lids (single knob) (Ware Revere Handles) BUY NOW

    Revere Replacement Lid Knob for Ware Lids (single

    These are replacement lid knobs for Revere Ware lids. They fit lids with knobs that appear the same. These parts are newly manufactured and are made to look and work just like original Revere Ware knob. Material: Bakelite, brass Includes: Bakelite knob with brass screw insert. The screw insert is the female part inside the knob. This knob does NOT come with a separate screw as all Revere Ware lids have a screw stud attached on them. If you want to use this knob with another type of lid that does not have a built in screw stud, you will need to purchase an 8-32 (stainless or brass) screw separately and cut it to the proper size. This listing is for a single knob only. They are also sold in pairs (a different listing) to help reduce shipping and handling costs. Measurements: 1.7 in (43 mm) diameter, 0.7 in (18 mm) tall. Fits: All Revere Ware lids, vintage era and newer that have a similar looking knob. This knob may not fit Revere Ware lid styles that have a different looking knob. Replaces: The part was called "Bakelite Cover Knob" and the original Revere number for this part was 2677. It was also referred to as part no. 625. Bakelite notes Over-tightening the knobs may cause the Bakelite to crack. Be gentle. Bakelite is generally not oven safe. Bakelite will be dul...

  • Color: Black
  • Brand: Revere
  • ASIN: B017GRFQBW
  • UPC: 898746002231
  • superlin Top Handle For Rena Ware Lids Before 1992 with screw #1727 New (Revere Handles Ware) BUY NOW

    superlin Top Handle For Rena Ware Lids Before 1992 with screw #1727

  • Color: Black
  • Brand: Superlin
  • ASIN: B079FYKMNF
  • Large 2-screw replacement handle for vintage Revere Ware pans (Handles Revere Ware) BUY NOW

    Large 2-screw replacement handle for vintage Revere Ware

    These are large sized replacement handles for vintage era Revere Ware pans. These parts are new and are made to look and work just like original Revere Ware handles. Material: Bakelite, stainless steel Includes: Two handle halves and hardware set Measurements: 5.25 inch (130 mm) long, 3.1 inch (79 mm) between holes on center, fits a 3/4 inch metal spline. How to fit: To determine the proper size handle make sure your sauce pan or skillet has a 3/4 inch tall metal spline, and has approximately 3.1 inches between the centers of the screw holes. If you have a 3/4" spline and 3.7" between the centers of the holes, you need the xtra large handle. For a 5/8" spline, you need the medium handle, and a 3/8" spline height, the small handle. Possibly fits: Vintage era 7 inch pans, 8 inch skillets, 9 inch square skillets. These fit Revere Ware pans with handles that have two screws through the Bakelite. Hardware Notes The screws in the hardware set are Phillips head, not slotted like the original Revere Ware screw sets were. Because the original slot head screws strip very easily, we consider this an improvement. Bakelite Notes Bakelite is a great heat resistant material, but it can be a bit brittle. The most important thing is to not over tighten the screws when assembling the pan h...

  • Color: Black
  • Brand: RevereWareParts.com
  • ASIN: B001TZ9DXA
  • UPC: 898746002040
  • Replacement Lid Knobs for Revere Ware Lids (two knobs) (Ware Revere Handles) BUY NOW

    Replacement Lid Knobs for Revere Ware Lids (two

    These are replacement lid knobs for Revere Ware lids. They fit lids with knobs that appear the same. These parts are newly manufactured and are made to look and work just like original Revere Ware knob. Material: Bakelite, brass Includes: Bakelite knob with brass screw insert. The screw insert is the female part inside the knob. This knob does NOT come with a separate screw as all Revere Ware lids have a screw stud attached on them. If you want to use this knob with another type of lid that does not have a built in screw stud, you will need to purchase an 8/32 (stainless or brass) screw separately and cut it to the proper size. Measurements: 1.7 in (43 mm) diameter, 0.7 in (18 mm) tall. Fits: All Revere Ware lids, vintage era and newer that have a similar looking knob. This knob may not fit Revere Ware lid styles that have a different looking knob. Replaces: The part was called "Bakelite Cover Knob" and the original Revere number for this part was 2677. It was also referred to as part no. 625. Bakelite notes Over-tightening the knobs may cause the Bakelite to crack. Be gentle. Bakelite is generally not oven safe. Bakelite will be dulled by washing in a dishwasher. In this listing we sell the knobs in pairs to reduce the shipping cost per item. ...

  • Color: Black
  • Brand: RevereWareParts.com
  • ASIN: B001U2N6YY
  • UPC: 898746002071
  • Replacement Vintage Revere Ware Pot/dutch Oven Handle Pair (2-screw) (Ware Revere Handles) BUY NOW

    Replacement Vintage Revere Ware Pot/dutch Oven Handle Pair

    These are replacement handles for vintage era Revere Ware pots and Dutch ovens (the ones with two screws per handle). These parts are newly manufactured and are made to look and work just like original Revere Ware pot handles. Material: Bakelite, stainless steel Includes: Each handle includes two handle halves + four screws. Each order includes two handles, enough for one pot. Measurements: 3.33 in (85 mm) long, 0.68 in (17 mm) thick, holes are 1.5 in (38 mm) apart on center. Fits: Vintage era pots and Dutch ovens. If your pot handles look like these, they should fit. Replaces: The original Revere part number for this replacement handle was 628. Part Notes The screws included with these handles are Phillips head, not slotted like the original Revere Ware pot handle screws were. Because the original slot head screws strip very easily, we consider this an improvement. These handles have a matte finish, not a glossy one like the other Bakelite parts we sell. In our experience, some original pot handles had a glossy finish and some had a matte finish. We chose to go with the matte finish to provide a better grip. Bakelite notes Because Bakelite is somewhat brittle, over tightening can cause the Bakelite to crack or the screw inserts to pull out. These handles are not oven-safe and re...

  • Color: Black
  • Brand: RevereWareParts.com
  • ASIN: B001U2RBBI
  • UPC: 898746002088
  • Revere Ware Pan/skillet 2-screw Handle Replacement Hardware Set (Med, Lg, X-lg Handles) (Two Sets) (Revere Ware Handles) BUY NOW

    Revere Ware Pan/skillet 2-screw Handle Replacement Hardware Set (Med, Lg, X-lg Handles) (Two

    These are replacement screws, nuts, and hanging loops for vintage era (two screw type) Revere Ware pan handles. They are specifically made for the three largest sizes of Revere Ware handles and WILL NOT WORK on the small handle size. These parts are newly manufactured and are made to look and work just like original Revere Ware hardware, with the exceptions noted below. Includes TWO COMPLETE SETS, enough for two separate pans. Material: Stainless steel Includes: Two sets of: two nuts, two screws, and a hanging hook; enough for two separate pans. Fits: Vintage era medium, large, and x-large skillet and pan handles. These fit Revere Ware pans with handles that have two screws through the Bakelite where the two screws are at opposite ends of the handle. These screws will only work with the medium, large, and x-large two-screw vintage style handle. These screws and nuts will not fit in the small handle size or the single screw newer handle. Hardware Notes The screws in the hardware set are Phillips head, not slotted like the original Revere Ware screw sets were. Because the original slot head screws strip very easily, we consider this an improvement. Installation Notes In some cases, the old screws can rust together and are very hard to get off. Twisting the screw also twists th...

  • Color: Stainless Steel
  • Brand: RevereWareParts.com
  • ASIN: B001U2E1DY
  • UPC: 898746002064
  • X-large 2-screw replacement handle for vintage Revere Ware pans (Revere Handles Ware) BUY NOW

    X-large 2-screw replacement handle for vintage Revere Ware

    These are x-large sized replacement handles for vintage era 2-screw Revere Ware pans. These parts are newly manufactured and are made to look and work just like original Revere Ware handles. Material: Bakelite, stainless steel Includes: Two handle halves + hardware set Measurements: 5.7 in (145 mm) long, 3.7 in (95 mm) between holes on center. How to fit: To determine the proper size handle make sure your sauce pan or skillet has a 3/4 inch tall metal spline, and has approximately 3.7 inches between the centers of the screw holes. If you have a 3/4" spline and 3.1" between the centers of the holes, you need the large handle, not this one. For a 5/8" spline, you need the medium handle, and a 3/8" spline height, the small handle. Typically fits: Vintage era 8 in pans, 10 in & 12 in skillets, 10 in square skillets, large griddles, and possibly others. These fit Revere Ware pans with handles that have two screws through the Bakelite. Hardware Notes The screws in the hardware set are Phillips head, not slotted like the original Revere Ware screw sets were. Because the original slot head screws strip very easily, we consider this an improvement. Bakelite Notes Bakelite is a great heat resistant material, but it can be a bit brittle. The most important thing is to not over tighte...

  • Color: Black
  • Brand: RevereWareParts.com
  • ASIN: B001U2J1HK
  • UPC: 898746002057
  • X-large 1-screw Replacement Handle for Revere Ware Pans (Ware Revere Handles) BUY NOW

    X-large 1-screw Replacement Handle for Revere Ware

    These are small sized replacement handles for newer era Revere Ware pans. These parts are newly manufactured and are made to look and work just like original Revere Ware handles. Material: Bakelite, stainless steel, aluminum Includes: One handle + hardware set Measurements: 6.2 in (158 mm) long overall, 5.4 in (137 mm) long Bakelite Fits: Newer style 4 quart sauce pans and similar handled steamer baskets, 9 inch, 10 inch, and 12 inch skillets; both copper bottom and tri-ply aluminum core varieties, and possibly others (definition of skillet, pan, etc. here). These fit Revere Ware cookware with handles that have one screw through the metal part of the handle. Note that all sizes of this type of handle (small, medium, large, and x-large) have the same size metal spline at the end, so they will fit any pot that accepts this type of handle, although a large handle on a very small pot might be visually unappealing. Please use the measurements above to insure you choose a proper size. Replaces: Revere called this handle style "Style No. 3" and "one-piece". The original Revere part number for this handle (x-large size) was 36043. It also had an older part number of the 4xx type that we have not been able to determine. Hardware Notes The screw in the hardware set is Phillips ...

  • Color: Black
  • Brand: RevereWareParts.com
  • ASIN: B004MC6BK0
  • UPC: 898746002200
  • Small 1-screw Replacement Handle for Revere Ware Pans (Ware Handles Revere) BUY NOW

    Small 1-screw Replacement Handle for Revere Ware

    These are small sized replacement handles for newer era Revere Ware pans that typically have a rivet or screw through the metal part of the handle. These parts are newly manufactured and are made to look and work just like original Revere Ware handles. Material: Bakelite, stainless steel, aluminum Includes: One handle + hardware set Measurements: 4.9 in (126 mm) long overall, 4.1 in (105 mm) long Bakelite Fits: Newer style 3/4 quart, 1 quart, and 1 1/2 quart sauce pans, 6-inch skillets; both copper bottom and tri-ply aluminum core varieties, and possibly others (definition of skillet, pan, etc. here). These fit Revere Ware cookware with handles that have one screw through the metal part of the handle. Note that all sizes of this type of handle (small, medium, large, and x-large) have the same size metal spline at the end, so they will fit any pot that accepts this type of handle, although a large handle on a very small pot might be visually unappealing. Please use the measurements above to insure you choose a proper size. Replaces: Revere called this handle style "Style No. 3" and "one-piece". The original Revere part number for this handle (small size) was 57484. It also had an older part number of the 4xx type that we have not been able to determine. Hardware Notes ...

  • Color: Black
  • Brand: RevereWareParts.com
  • ASIN: B004MBW54M
  • UPC: 898746002170
  • 2 New Side Handles for Rena Ware Pot and Pans #1718 Before 1997 1.5L, 2L, 3L (Handles Ware Revere) BUY NOW

    2 New Side Handles for Rena Ware Pot and Pans #1718 Before 1997 1.5L, 2L,

  • Color: Black
  • Brand: Superlin
  • ASIN: B07B94BTN2
  • Revere Line 3-Quart Covered Saucepan (Ware Handles Revere) BUY NOW

    Revere Line 3-Quart Covered

  • Color: Beige
  • Brand: Revere
  • ASIN: B00005B5Z0
  • UPC: 050035140370
  • Large 1-screw Replacement Handle for Revere Ware Pans (Handles Ware Revere) BUY NOW

    Large 1-screw Replacement Handle for Revere Ware

    These are large sized replacement handles for newer era Revere Ware pans. These parts are newly manufactured and are made to look and work just like original Revere Ware handles. Material: Bakelite, stainless steel, aluminum Includes: One handle + hardware set IF YOU GET A HANDLE MISSING THE HARDWARE, PLEASE CONTACT US AND WE WILL SEND YOU THE HARDWARE SEPARATELY. Measurements: 5.6 in (142 mm) long overall, 4.8 in (122 mm) long Bakelite Fits: Newer style 2 quart and 3 quart sauce pans and similar handled steamer baskets, 8 inch skillets; both copper bottom and tri-ply aluminum core varieties, and possibly others. These fit Revere Ware cookware with handles that have one screw through the metal part of the handle. Note that all sizes of this type of handle (small, medium, large, and x-large) have the same size metal spline at the end, so they will fit any pot that accepts this type of handle, although a large handle on a very small pot might be visually unappealing. Please use the measurements above to insure you choose a proper size. Replaces: Revere called this handle style "Style No. 3" and "one-piece". The original Revere part number for this handle (large size) was 36031. It also had an older part number of the 4xx type that we have not been able to determine. Hardware Notes ...

  • Color: Black
  • Brand: RevereWareParts.com
  • ASIN: B004MC86JY
  • UPC: 898746002194
  • Revere Ware Pan/skillet 2-screw Handle Replacement Hardware Set (Small Handles) (Two Sets) (Ware Handles Revere) BUY NOW

    Revere Ware Pan/skillet 2-screw Handle Replacement Hardware Set (Small Handles) (Two

    PLEASE DO NOT ORDER THIS HANDLE SIZE UNLESS YOU ARE SURE IT WILL FIT YOUR HANDLE! THIS HARDWARE SET ONLY WORKS ON THE SMALL HANDLE SIZE WHICH VERY FEW PANS ACTUALLY HAVE. These are replacement screws, nuts, and hanging loops for the smallest size vintage era (two screw type) Revere Ware pan handles. These parts are newly manufactured and are made to look and work just like original Revere Ware hardware, with the exceptions noted below. Material: Stainless steel Includes: Two nuts, two screws, and a hanging hook Measurements: Screws are .35 inches (9.5 mm) long including head. Barrel nuts are .5 inches (13 mm) long including head. The hook is slightly smaller than the similar hardware set made for medium, large, and x-large 2-screw vintage Revere Ware handles to make it easier to crimp on. Fits: Vintage era small Revere Ware pan handles (i.e. for 6 inch skillets). These fit Revere Ware pans with handles that have two screws through the Bakelite. These will only work with the small two-screw vintage style handle. These screws and nuts will not fit in the larger handle sizes or the single screw newer handle. Replaces: The original Revere part number for the screw/nut/washer set was 36079 and for the hanging loop was 2501. Hardware Notes The screws in the hardware se...

  • Color: Stainless Steel
  • Brand: RevereWareParts.com
  • ASIN: B004MBXGKY
  • UPC: 898746002156
  • superlin Top Handle Replaces For Rena Ware Lids #1726 with vent Before 1992 (Revere Ware Handles) BUY NOW

    superlin Top Handle Replaces For Rena Ware Lids #1726 with vent Before

  • Color: Black
  • Brand: superlin
  • ASIN: B07BBN3Z5C
  • Replacement Handle Pair for Revere Ware Pots/Dutch Ovens, Single Screw, New (Handles Ware Revere) BUY NOW

    Replacement Handle Pair for Revere Ware Pots/Dutch Ovens, Single Screw,

    These are replacement handles for newer era (post 1968) Revere Ware pots and Dutch ovens (the ones with one screw per handle that screw directly at a 90 degree angle into the side of the pot). These handles are not made for, and will not fit any other model of Revere Ware pots, or pots from any other maker.These parts are newly manufactured and are made to look and work just like original Revere Ware pot handles. Material: Bakelite, stainless steel Includes: Each handle includes two handle halves + two screws. Each order includes two handles, enough for one pot. Measurements: Approximately 3.0 in (75.5 mm) x 1.25 (32 mm) x 1.5 in in (38 mm) Fits: Newer era pots and Dutch ovens that use a single screw only, that screws at a 90 degree angle into a bracket on the side of the pot. If your pot handles look like these, they should fit. Replaces: The original Revere part number for this part was 36134. Part Notes The screws included with these handles are Phillips head, not slotted like some of the original Revere Ware pot handle screws were. Because the original slot head screws strip very easily, we consider this an improvement. Bakelite notes Because Bakelite is somewhat brittle, over tightening can cause the Bakelite to crack. Use caution when tightening. These handles (and Bakelite...

  • ASIN: B00OQHO1S0
  • 2 New Side Handles for Rena Ware Pot and Pans #1720 Before 1997 12L, 16L (Ware Revere Handles) BUY NOW

    2 New Side Handles for Rena Ware Pot and Pans #1720 Before 1997 12L,

    2 new side handles for rena ware pot and pans #1720 12 L and 16 L.

  • Color: Black
  • Brand: superlin
  • ASIN: B079FTPPHQ
  • Revere Whistling Tea Kettle, 2-1/3-Quart, Silver (Ware Revere Handles) BUY NOW

    Revere Whistling Tea Kettle, 2-1/3-Quart,

    Revere Classic 2-1/3 Quart Whistling Tea Kettle REVERE cookware have been part of American history since patriot and silversmith Paul Revere started making copper sheathing for naval vessels in 1801. Paul founded Revere Copper Company which evolved into Copper and Brass, Inc., the makers of Revere Ware Copper Clad Stainless Steel Cookware. Today, REVERE cookware is one of the most recognized and preferred brands of metal rangetop cookware, known by consumers for its legendary heritage, quality and durability. With a strong commitment to consumer research and technological advancement, the REVERE cookware team constantly introduces new, innovative products adapted to changing consumer needs. One of the first names in tea kettles, Revere offers a range of high-quality polished stainless steel models with copper bottoms for quick and even heat distribution. Polished stainlesss steel exterior is low maintenance. Traditionally styled, the kettles feature easy-grip, black phenolic handles, and whistling spouts. Constructed of high quality stainless steel polished to a mirror finish for lasting beauty. Phenolic handles are cool to the touch. Signature copper bottom for quick heating. One Year Limited Warranty on all Revere Tea Kettles World Kitchen, LLC will replace any defe...

  • Brand: Revere
  • ASIN: B00005B5ZV
  • UPC: 050035270176
  • Revere Whistling Tea Kettle (Ware Revere Handles) BUY NOW

    Revere Whistling Tea Kettle

    Revere Whistling Tea Kettle

  • Color: Stainless
  • Brand: Revere
  • ASIN: B00MCLSRM8
  • UPC: 735343235528
  • Revere 1400 Line 7-Piece Set (Revere Handles Ware) BUY NOW

    Revere 1400 Line 7-Piece Set

  • Color: Silver
  • Brand: Revere
  • ASIN: B00005B5ZA
  • UPC: 050035004719
  • Vintage (Pre-1968) Revere Ware Copper Clad 8-Inch Skillet with Lid (Handles Revere Ware) BUY NOW

    Vintage (Pre-1968) Revere Ware Copper Clad 8-Inch Skillet with

  • Brand: Revere
  • ASIN: B00G12VLKO

TOP Revere Ware Handles Results

NextDealAddict offers best deals for Revere Ware Handles


Customers who bought Revere Ware Handles also bought Large Hand Painted Clay, Madeira Metallic Thread, Tennis Card - you may also be interested in these popular items.