Edelbrock Performer Rpm Air Gap

Edelbrock Performer Rpm Air Gap

Best Deals For Edelbrock Performer Rpm Air Gap at NextDealAddict.com

Compare now 82 Edelbrock Performer Rpm Air Gap on Next Deal Addict and find current offers with low prices - Last Checked Shopping Results on March 19, 2019

For every Edelbrock Performer Rpm Air Gap search, NextDealAddict shows the most relevant products from top stores right on the first page of results, and delivers a visually compelling, efficient and complete online shopping experience from the browser, smartphone or tablet.

  • Edelbrock 7501 Performer RPM Air-Gap Intake Manifold (Gap Edelbrock Rpm Performer Air) BUY NOW

    Edelbrock 7501 Performer RPM Air-Gap Intake

    The Edelbrock Performer RPM Air-Gap Intake Manifold is manufactured from aluminum and given a natural finish. The exclusive Air-Gap design features an open space between the intake runners and the hot engine oil resulting in a cooler, denser charge and more power. The runners are tuned up to move the power band 1,000 RPM higher than Performer Air-Gap manifolds, from idle-5,500 RPM up to 1,500-6,500 RPM. It also features nitrous bosses, rear water outlets and two distributor clamp locations.

  • Brand: Edelbrock
  • ASIN: B000CN9164
  • UPC: 085347075010
  • Edelbrock 2042 Performer RPM Air-Gap Intake Manifold Installation Kit Inc. Manifold PN[7501]/Intake Gasket PN[7201]/Intake Bolt Kit PN[8504]/Carb Stud Kit PN[8008]/Carb Base Gasket/RTV Sealant Performer RPM Air-Gap Intake Manifold Installation Kit (Edelbrock Gap Rpm Performer Air) BUY NOW

    Edelbrock 2042 Performer RPM Air-Gap Intake Manifold Installation Kit Inc. Manifold PN[7501]/Intake Gasket PN[7201]/Intake Bolt Kit PN[8504]/Carb Stud Kit PN[8008]/Carb Base Gasket/RTV Sealant Performer RPM Air-Gap Intake Manifold Installation

    We have packaged all necessary components to replace your stock iron intake manifold. These kits include an Edelborck aluminum intake manifold, intake gasket set, carburetor base gasket, RTV sealant, intake bolts and carburetor studs for an all-in-one-box installation for your street rod or muscle car. Get better performance from a simple manifold replacement kit.

  • Brand: Edelbrock
  • ASIN: B009166OUO
  • UPC: 085347020423
  • Assault Racing Products PC2025 Small Block Chevy Dual Plane Air Gap Polished Aluminum Intake 1500-6500 RPM SBC (Gap Air Rpm Performer Edelbrock) BUY NOW

    Assault Racing Products PC2025 Small Block Chevy Dual Plane Air Gap Polished Aluminum Intake 1500-6500 RPM

    In our opinion these are not $400.00 show quality polished intakes. Flaws in the polish such as scuffs and marks will require more polishing to enhance the finish. This is a new polished aluminum dual plane intake for small block Chevy. 180° high rise design, big power over a wide RPM range. Has the open air area under the carb pad to help keep fuel mixture cool and improve power. Ideal for everyday to high performance street applications, will produce power in the lower RPM range and not kill your bottom end like a single plane would. These intakes are produced from steel molds to reduce core shift, have all the major features found on the expensive ones such as 4 corner water outlets and nitrous bosses, and the best part - the price! Intake works with 283-400 small blocks up to 1995. Includes special adapter bushings for the middle holes on the '87 to '95 heads. Does not fit the newer Vortec heads. For use with square bore style carbs. Provides standard bosses and tapped holes for street accessories such as A/C and alternator brackets. No provision for manual choke or exhaust crossover and are not EGR equipped. Manifold Specifications: Part Number: PC2025 RPM Range: 1500 - 6500 Intake Port Dimensions: 2.09" x 1.25"*1 Manifold Height: 4.65" NOTE (1) - port is intentionally le...

  • Color: Polished
  • Brand: Assault Racing Products
  • ASIN: B00S75GKF4
  • Edelbrock 7501 SBC Performer RPM Air Gap Intake Manifold w/Bolts/Gaskets/RTV (Performer Air Edelbrock Rpm Gap) BUY NOW

    Edelbrock 7501 SBC Performer RPM Air Gap Intake Manifold

    This listing is for an early (1986 and earlier) Small Block Chevy Intake Kit. Consisting of an Edelbrock Performer RPM Airgap Intake Manifold (Part #7501), Edelbrock Intake Manifold Gasket Set (Part # 7201), ARP Black Oxide Intake Manifold Bolt Set (Part # 134-2001), Permatex Black RTV (Part #82180) and Mr. Gasket Carburetor Stud Kit (Part # 59). We've put together a proven kit to take the guesswork out of choosing the right components for your early small block Chevy! Edelbrock Performer RPM Air Gap Intake Manifold. Part # 7501. RPM AIR-GAP (1500-6500 RPM) Designed for 1955-86 262-400 c.i.d. Chevrolet V8's, the award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that's used on our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all 1976 and later alternator and A/C brackets for the street. The heater outlet boss is angled for proper fit over the valve cover. The temp sensor boss clears all waternecks. For square-bore carburetors only. No provision for exhaust- heated chokes and no exhaust crossover. Not for 1987 and later...

  • Brand: Edelbrock
  • ASIN: B073BKL438
  • UPC: 018227485968
  • Edelbrock 7516 Performer RPM Air-Gap Intake Manifold (Performer Edelbrock Air Gap Rpm) BUY NOW

    Edelbrock 7516 Performer RPM Air-Gap Intake

    The Edelbrock Vortec RPM Air-Gap Intake Manifold is based on the powerful Performer RPM Vortec EDL-7116. This single four-barrel intake is designed for 1996 and later Vortec (L31) cast iron or the new Edelbrock E-Tec aluminum heads. The RPM air-gap manifold delivers outstanding performance using the same air-gap technology found in our race-winning Victor manifolds. This unique design separates the hot engine valley from the air/fuel mixture for a cooler, denser charge and more power throughout the RPM range. An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. It includes rear water outlets, nitrous bosses and a temp sensor boss that clears all waternecks, two distributor clamp locations and a heater outlet boss that's angled for proper fit over the valve cover. It accepts 1976 and later alternator and air-conditioning brackets for street installations and is for square-bore carburetors.

  • Brand: Edelbrock
  • ASIN: B00062ZTZS
  • UPC: 085347075164
  • Manifold Installation Kit; Performer; EPS; SBC; 1957-1986; Natural Finish (Performer Edelbrock Air Rpm Gap) BUY NOW

    Manifold Installation Kit; Performer; EPS; SBC; 1957-1986; Natural

    Performer EPS Intake Manifold Installation KitSB-Chevy 1957-86Idle-5500 RPM RangeNon-EGR applications4-bbl square-bore carb flange Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the Edelbrock Performer manifold 350-2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most. Look for the Performer EPS to "up the standards" in dual-plane intake manifold design. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains.Installation NotesPort Exit Dimensions: 1.15" x 1.87" Carb Pad Height: 4.27" Click here to determine carburetor pad height.Manifold Height: (A) 3.74" (B) 4.80"MANIFOLD INSTALLATION KITS INCLUDEKitPart #IntakeManifoldIntakeGasketIntakeBolt KitCarbStud KitCarbBase...

  • Brand: Edelbrock
  • ASIN: B0091V29H6
  • UPC: 008534720401
  • ACDelco 25200449 GM Original Equipment Intake Manifold (Gap Rpm Performer Air Edelbrock) BUY NOW

    ACDelco 25200449 GM Original Equipment Intake

    ACDelco GM Original Equipment Engine Intake Manifolds evenly distribute the incoming engine air to each of the cylinders, ensuring the proper amount of air mixes with the proper amount of fuel, and are GM-recommended replacements for your vehicle's origin.

  • Brand: ACDelco
  • ASIN: B07B3YGB2K
  • UPC: 808709701033
  • Edelbrock 7561 Performer RPM Air Gap Intake Manifold w/Bolts/Gaskets/RTV - BBC Oval Port (Gap Air Rpm Performer Edelbrock) BUY NOW

    Edelbrock 7561 Performer RPM Air Gap Intake Manifold w/Bolts/Gaskets/RTV - BBC Oval

    This listing is for an Intake Kit for the Big Block Chevy with Oval Port Heads Consisting of an Edelbrock Performer RPM Air Gap Intake Manifold (Part #7561), Edelbrock Intake Manifold Gasket Set (Part # 7203), ARP Black Oxide Intake Manifold Bolt Set (Part # 135-2001), Permatex Black RTV (Part #82180) and Mr. Gasket Carburetor Stud Kit (Part # 59) This intake works with square bore carburetors. We've put together a proven kit to take the guesswork out of choosing the right components for your performance Oval Port BBC Engine! Edelbrock Performer RPM Air Gap Intake Manifold. Part # 7561. RPM AIR-GAP 2-O (1500-6500 RPM) Designed for street 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. The RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all late model alternator and A/C brackets for the street. For square bore carburetors only. No provision for exhaust heated chokes and no exhaust crossover....

  • Brand: Edelbrock
  • ASIN: B073BMQMT1
  • UPC: 018227485999
  • Edelbrock 7521 Performer RPM Air-Gap Intake Manifold (Edelbrock Performer Gap Rpm Air) BUY NOW

    Edelbrock 7521 Performer RPM Air-Gap Intake

    The Edelbrock Performer RPM Air-Gap Intake Manifold incorporates the same race-winning technology that's been used on Edelbrock Victor Series competition intakes for years. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. It includes nitrous bosses and has no provision for exhaust heated chokes and no exhaust crossover. Aftermarket 4-bbl carburetors are not compatible with Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000. The runners are tuned to move the power band 1,000 RPM higher than Performer Air-Gap manifolds, from idle-5,500 RPM up to 1,500-6,500 RPM.

  • Brand: Edelbrock
  • ASIN: B00062ZHS2
  • UPC: 085347075218
  • Edelbrock 2701 Performer Intake Manifold (Rpm Gap Air Performer Edelbrock) BUY NOW

    Edelbrock 2701 Performer Intake

    The Edelbrock Performer Intake Manifold delivers superior performance with square-bore carburetors. Horsepower gains from idle to 5,500 RPM, when used with Performer Series square-bore or Thunder Series AVS carburetors. Dyno tests show that the power gains an extra 5 horsepower, 9 foot / pounds and torque across the entire RPM range over their own performer manifolds.

  • Brand: Edelbrock
  • ASIN: B00063046Q
  • UPC: 085347027019
  • Edelbrock 7531 Performer RPM Air-Gap Intake Manifold (Rpm Performer Air Edelbrock Gap) BUY NOW

    Edelbrock 7531 Performer RPM Air-Gap Intake

    The Edelbrock Performer RPM Air-Gap Intake Manifold incorporates race-winning technology. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. It includes standard oil fill and PCV, as well as early air conditioning support bracket accessory bosses. It has no provision for exhaust heated chokes and no exhaust crossover. The aftermarket 4-bbl carburetors are not compatible with Auto Overdrive Transmission (AOD).

  • Brand: Edelbrock
  • ASIN: B0006308TE
  • UPC: 085347075317
  • Edelbrock 7562 Performer RPM Air-Gap Intake Manifold (Performer Rpm Gap Edelbrock Air) BUY NOW

    Edelbrock 7562 Performer RPM Air-Gap Intake

    The Edelbrock Performer RPM Air-Gap Intake Manifold is designed for high-performance rectangular-port big block cylinder heads. The new RPM air-gap incorporates the race-winning technology that has been used in the Victor Series intakes. The open air space separates the runners from the hot engine oil, and as a result, the air/fuel mixture stays cooler for a denser charge and more power. It includes rear water outlets, two distributor clamp locations and nitrous bosses. It accepts all late model alternators and A/C brackets for the street and is for square-bore carburetors only. The manifold height is 4.45 inch in the front and 6.0 inch in the rear. The port dimensions are 2.24 inch tall by 1.60 inch wide. The runners are tuned to move the power band 1,000 RPM higher than Performer air-gap manifolds, from idle-5,500 RPM up to 1,500-6,500 RPM. It has no provision for exhaust heated chokes and no exhaust crossover.

  • Brand: Edelbrock
  • ASIN: B00062ZHC8
  • UPC: 085347075621
  • Edelbrock 7101 Performer RPM Intake Manifold (Air Rpm Performer Edelbrock Gap) BUY NOW

    Edelbrock 7101 Performer RPM Intake

    The Edelbrock Performer RPM Intake Manifold is intended for high-performance street or competition engines that run up to 6,500 RPM with maximum power. The front height of the manifold measures 4.20 and the rear 5.25. The Performer RPMs are dual-plane, high-rise intakes with a 180 degree firing order. This manifold produces incredible top-end horsepower while retaining good throttle response. The Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. It is not for emissions-equipped engines. A Performer RPM intake gives you the ultimate in street high-performance. It provides power like a single-plane and throttle response like a dual-plane.

  • Brand: Edelbrock
  • ASIN: B00062YSIW
  • UPC: 085347071012
  • Edelbrock 2101 Performer Intake Manifold (Rpm Gap Edelbrock Performer Air) BUY NOW

    Edelbrock 2101 Performer Intake

    The Edelbrock Performer EGR (Electronic Gas Recirculation) Intake Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This patented design greatly improves torque over a wide RPM range for excellent throttle response, especially off-idle through the mid-range. The intake manifold directs the air or air-fuel mixture from the throttle body to the intake ports in the cylinder head. The flow typically proceeds from the throttle body into a chamber called the plenum, which in turn feeds individual tubes, called runners, leading to each intake port. It accepts late model waterneck, air-conditioning, alternator and H.E.I. (Heat Energy Ignition).

  • Brand: Edelbrock
  • ASIN: B000182BA8
  • UPC: 085347021017
  • Edelbrock 2021 Single-Quad Manifold And Carb Kit For Performer EPS Manifold w/Performer Series 600cfm Carb Incl. Carb/Fuel Line/Intake Bolts/Gaskets Satin Finish Single-Quad Manifold And Carb Kit (Air Edelbrock Gap Rpm Performer) BUY NOW

    Edelbrock 2021 Single-Quad Manifold And Carb Kit For Performer EPS Manifold w/Performer Series 600cfm Carb Incl. Carb/Fuel Line/Intake Bolts/Gaskets Satin Finish Single-Quad Manifold And Carb

    With a Manifold and Carb Kit, its easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box.

  • Brand: Edelbrock
  • ASIN: B00840ZSPU
  • UPC: 085347020218
  • Edelbrock 75254 Performer RPM Air-Gap Dual Quad Intake Manifold (Rpm Performer Air Edelbrock Gap) BUY NOW

    Edelbrock 75254 Performer RPM Air-Gap Dual Quad Intake

    The Edelbrock Performer RPM Air Gap Dual Quad Intake Manifolds' unique air gap design separates the runners from the hot engine valley for a cooler, denser charge. These manifolds measure 4.57 inch tall in the front and 4.92 inch tall in the rear with port dimensions of 1.92 inch tall by 1.16 inch wide. They include a three-step vacuum metalizing process, base coat, aluminum coat, and clear top coat to enhance abrasion and chemical resistance.

  • Brand: Edelbrock
  • ASIN: B000VDNW56
  • UPC: 085347752546
  • Edelbrock 7581 Performer RPM Air-Gap Intake Manifold (Performer Rpm Edelbrock Air Gap) BUY NOW

    Edelbrock 7581 Performer RPM Air-Gap Intake

    The Edelbrock Endurashine Performer RPM Air-Gap Intake Manifold incorporates the same race-winning design that has been used on our Victor Series competition intakes for years. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. It has a larger cross sectional area and a taller carburetor flange than EDL-7181 for compatibility with large displacement, stroker 351-W based engines. It includes nitrous bosses and has no provision for exhaust heated chokes and no exhaust crossover. The aftermarket 4-bbl carburetors are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000. The runners are tuned to move the power band 1,000 RPM higher than Performer air-gap manifolds, from idle-5,500 RPM up to 1,500-6,500 RPM.

  • Brand: Edelbrock
  • ASIN: B00062ZOAS
  • UPC: 085347075812
  • Edelbrock 7577 Performer RPM Air-Gap Intake Manifold (Gap Rpm Edelbrock Air Performer) BUY NOW

    Edelbrock 7577 Performer RPM Air-Gap Intake

    The Edelbrock Performer RPM Air-Gap Intake Manifold's exclusive design separates the runners from the heat of the lifter-valley cover resulting in a cooler, denser charge and more power. Constructed from aluminum with a polished finish, these manifold's basic operation ranges between 1,500-6,500 rpm.

  • Brand: Edelbrock
  • ASIN: B000VDHZOU
  • UPC: 085347075775
  • Edelbrock 75214 Performer RPM Air-Gap Intake Manifold (Edelbrock Performer Air Rpm Gap) BUY NOW

    Edelbrock 75214 Performer RPM Air-Gap Intake

    The Edelbrock PermaStar Performer RPM Air-Gap Intake Manifold air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. It includes rear water outlets, two distributor clamp locations and nitrous bosses. The heater outlet boss is angled for a proper fit over the valve cover. There is no provision for exhaust-heated chokes and no exhaust crossover. The PermaStar finish is a high performance coating that gives a super shiny show quality smoked chrome looking finish that will not oxidize or fade and cleans easily. The runners are tuned to move the power band 1,000 RPM higher than Performer air-gap manifolds, from idle to 5,500 RPM up to 1,500-6,500 RPM.

  • Brand: Edelbrock
  • ASIN: B000CN54K6
  • UPC: 085347752140
  • Edelbrock 2040 Performer EPS Intake Manifold Installation Kit Inc. Intake Manifold PN[2701]/Intake Gasket PN[7201]/Intake Bolt Kit PN[8504]/Carb Stud Kit PN[8008]/Carb Base Gasket/RTV Sealant Performer EPS Intake Manifold Installation Kit (Rpm Performer Gap Edelbrock Air) BUY NOW

    Edelbrock 2040 Performer EPS Intake Manifold Installation Kit Inc. Intake Manifold PN[2701]/Intake Gasket PN[7201]/Intake Bolt Kit PN[8504]/Carb Stud Kit PN[8008]/Carb Base Gasket/RTV Sealant Performer EPS Intake Manifold Installation

    We have packaged all necessary components to replace your stock iron intake manifold. These kits include an Edelborck aluminum intake manifold, intake gasket set, carburetor base gasket, RTV sealant, intake bolts and carburetor studs for an all-in-one-box installation for your street rod or muscle car. Get better performance from a simple manifold replacement kit.

  • Brand: Edelbrock
  • ASIN: B00919JE2Q
  • UPC: 085347020409
  • Edelbrock 7564 Performer RPM Air-Gap Intake Manifold (Air Performer Gap Rpm Edelbrock) BUY NOW

    Edelbrock 7564 Performer RPM Air-Gap Intake

    The Edelbrock Performer RPM Air-Gap Intake Manifold's exclusive design separates the runners from the heat of the lifter-valley cover resulting in a cooler, denser charge and more power. Constructed from aluminum with a polished finish, these manifold's basic operation ranges between 1,500-6,500 rpm.

  • Brand: Edelbrock
  • ASIN: B000VDHZOA
  • UPC: 085347075645
  • Edelbrock 7561 RPM Air-Gap intake manifold (Rpm Gap Air Performer Edelbrock) BUY NOW

    Edelbrock 7561 RPM Air-Gap intake

    The Edelbrock Exclusive Air-Gap design from Edelbrock features an open space between the intake runners and the hot engine oil resulting in a cooler, denser charge and more power. The Air-Gap manifolds are modeled after Performer RPM intakes for high-performance street power from idle 1,500 to 6,500 RPM and Performer Series intakes for power from idle to 5,500 RPM.

  • Brand: Edelbrock
  • ASIN: B00062ZHBY
  • UPC: 085347075614
  • Edelbrock 7525 Performer RPM Air Gap Dual Quad Intake Manifold (Air Rpm Performer Edelbrock Gap) BUY NOW

    Edelbrock 7525 Performer RPM Air Gap Dual Quad Intake

    The Edelbrock Performer RPM Air Gap Dual Quad Intake Manifolds' unique air gap design separates the runners from the hot engine valley for a cooler, denser charge. These manifolds measure 4.57 inch tall in the front and 4.92 inch tall in the rear with port dimensions of 1.92 inch tall by 1.16 inch wide. They include a three-step vacuum metalizing process, base coat, aluminum coat, and clear top coat to enhance abrasion and chemical resistance.

  • Brand: Edelbrock
  • ASIN: B000VDJP02
  • UPC: 085347075256
  • Dorman 615-183 Intake Manifold (Air Edelbrock Gap Rpm Performer) BUY NOW

    Dorman 615-183 Intake

    Dorman's Intake Manifold is manufactured to supply air, fuel mixture to cylinder. It is constructed from durable material that ensures durability and longevity. This intake manifold is backed by a limited lifetime warranty.

  • Color: Black
  • Brand: Dorman
  • ASIN: B0018DO5PY
  • UPC: 019495092896
  • Edelbrock 27014 Performer EPS EnduraShine Aluminum Intake Manifold (Rpm Gap Edelbrock Air Performer) BUY NOW

    Edelbrock 27014 Performer EPS EnduraShine Aluminum Intake

    The Edelbrock Performer EPS Intake Manifold features a low-rise, dual plane design with patented runner tuning and a 180 degree firing order. This combination boosts torque over a wide RPM range from idle to 5,500 RPM. They deliver improved throttle response over stock intake and come in non-EGR (Exhaust Gas Recirculation) style.

  • Brand: Edelbrock
  • ASIN: B000CN516I
  • UPC: 085347270149
  • Edelbrock 7562 Performer RPM Air Gap Intake Manifold w/Bolts/Gaskets/RTV - BBC Rectangle Port (Edelbrock Performer Gap Rpm Air) BUY NOW

    Edelbrock 7562 Performer RPM Air Gap Intake Manifold w/Bolts/Gaskets/RTV - BBC Rectangle

    This listing is for an Intake Kit for the Big Block Chevy with Rectangle Port Heads Consisting of an Edelbrock Performer RPM Air Gap Intake Manifold (Part #7562), Edelbrock Intake Manifold Gasket Set (Part # 7202), ARP Black Oxide Intake Manifold Bolt Set (Part # 135-2001), Permatex Black RTV (Part #82180), and Mr. Gasket Carburetor Stud Kit (Part # 59) This intake works with square bore carburetors. We've put together a proven kit to take the guesswork out of choosing the right components for your performance Rectangle Port BBC Engine! Edelbrock Performer RPM Air Gap Intake Manifold. Part # 7562. RPM AIR-GAP 2-R (1500-6500 RPM) Designed for street 396-502 c.i.d. Chevrolet V8's with high-performance rectangular-port heads, the RPM Air-Gap intake manifold incorporates our race-winning technology. The open air space separates the runners from the hot engine oil, and as a result, the air/fuel mixture stays cooler for a denser charge and more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all late model alternator and A/C brackets for the street. For square-bore carbs only. No provision for exhaust heated chokes and no exhaust crossover. Will not fit under stock hood of Corvette, 1964-67 Chevelle or 1967-81 Camaro ARP Black Oxide Intak...

  • Brand: Edelbrock
  • ASIN: B073BKQRCP
  • UPC: 018227486002
  • Edelbrock 2104 Performer Intake Manifold (Gap Air Performer Rpm Edelbrock) BUY NOW

    Edelbrock 2104 Performer Intake

    The Edelbrock Performer Intake Manifold features a low-rise, dual plane design with patented runner tuning and a 180 degree firing order. This combination boosts torque over a wide RPM range from idle to 5,500 RPM. They deliver improved throttle response over stock intake and come in non-EGR (Exhaust Gas Recirculation) style.

  • Brand: Edelbrock
  • ASIN: B000CN50K0
  • UPC: 085347021048
  • Edelbrock 7576 Performer RPM Air-Gap Intake Manifold (Edelbrock Rpm Gap Performer Air) BUY NOW

    Edelbrock 7576 Performer RPM Air-Gap Intake

    The Edelbrock Performer RPM Air-Gap Intake Manifold air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. It includes rear water outlets, two distributor clamp locations and nitrous bosses. The heater outlet boss is angled for a proper fit over the valve cover. There are no provisions for exhaust-heated chokes and no exhaust crossover. They come with a natural finish. The runners are tuned to move the power band 1,000 RPM higher than Performer air-gap manifolds, from idle to 5,500 RPM up to 1,500-6,500 RPM.

  • Brand: Edelbrock
  • ASIN: B000CN54LK
  • UPC: 085347075768
  • Edelbrock 75014 EnduraShine Performer RPM Air-Gap Intake Manifold (Performer Gap Air Rpm Edelbrock) BUY NOW

    Edelbrock 75014 EnduraShine Performer RPM Air-Gap Intake

    The Edelbrock Performer RPM Air-Gap Intake Manifold is manufactured from aluminum and given a bright polished aluminum looking shine. The exclusive Air-Gap design features an open space between the intake runners and the hot engine oil resulting in a cooler, denser charge and more power. The runners are tuned up to move the power band 1,000 RPM higher than the Performer Air-Gap manifolds, from idle-5,500 RPM up to 1,500-6,500 RPM. It also features nitrous bosses, rear water outlets and two distributor clamp locations.

  • Brand: Edelbrock
  • ASIN: B000CN70JE
  • UPC: 085347750146
  • Edelbrock 75614 Air-Gap Intake Manifold (Rpm Air Gap Performer Edelbrock) BUY NOW

    Edelbrock 75614 Air-Gap Intake

    The Edelbrock Air-Gap Intake Manifolds are provided with EnduraShine and incorporate race-winning technology. The open air space from the air-gap design separates the runners from the heat of the lifter-valley cover. It has a dual plane intake style. The air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. The runners are tuned to move the power band 1,000 RPM higher than performer air-gap manifolds, from idle-5,500 RPM up to 1,500-6,500 RPM. The EnduraShine finish is a super durable three step coating process that provides a bright polished aluminum looking show quality shine that will not oxidize or fade.

  • Brand: Edelbrock
  • ASIN: B000CN918W
  • UPC: 085347756148

TOP Edelbrock Performer Rpm Air Gap Results

NextDealAddict offers best deals for Edelbrock Performer Rpm Air Gap


Customers who bought Edelbrock Performer Rpm Air Gap also bought Stereo Preamplifier Kit, Birch Desk, Hibiscus Wall Decor - you may also be interested in these popular items.