1/4 Inch Hss Cutter

1/4 Inch Hss Cutter

Best Deals For 1/4 Inch Hss Cutter at NextDealAddict.com

Compare now 57 1/4 Inch Hss Cutter on Next Deal Addict and find current offers with low prices - Last Checked Shopping Results on November 14, 2018

NextDealAddict provides the best online shopping experience for 1/4 Inch Hss Cutter for the tech-enabled consumer, one that you want to return to again and again.

  • Steel Dragon Tools 1/4 BUY NOW

    Steel Dragon Tools 1/4" x 4" Pilot Pin for 2" Depth HSS Annular

    Steel Dragon Tools 1/4" x 4" Pilot Pin for 2" Depth HSS Annular CuttersThe Steel Dragon Tools® 1/4 in. x 4 in. pilot pin for use with 2-inch cutting depth high speed steel annular cutters. Pilot pins helps locate center of hole location. Pilot pin helps locate center of hole location and eject slug after drilling is complete. During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.Specifications:Pilot Pin: 1/4 in. x 4 in. (6.34 mm x 103 mm)Fits Steel Dragon Tools® AC1 annular cutters with 2-inch cutting depth.Pilot pin helps locate center of hole location.Pilot pin helps eject slug after drilling is complete.During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.

  • Brand: Steel Dragon Tools
  • ASIN: B0128TPAUA
  • In-tool-home 1/4 BUY NOW

    In-tool-home 1/4" X 1/4" HSS 4 Flute Straight End Mills Cutter Drill Bit Pack of

    Product Name : End Mill;Material : HSS Color : Gray 1/4x1/4; Cutting Diameter:1/4''; Cutting Depth:1'' ; Shank Diameter:1/4''; Suit for: Hardness of metal for above 30 degrees 4 Flute End Mill Cutter Package Content : 2 x End Mills

  • Brand: in-tool-home
  • ASIN: B01099VUQY
  • UPC: 714046431246
  • In-tool-home 1/8 BUY NOW

    In-tool-home 1/8" 3/16" 1/4" 5/16" 3/8" 1/2"high Speed Steel HSS 4 Flute Straight End Mill Cutter Set of

    Product Name : End Mill;Material : HSS Color : Gray 01:1/2"x1/2",Cutting Diameter:1/2", Cutting Depth:1.57", Shank Diameter:1/2" 02:1/4"x1/4",Cutting Diameter:1/4",Cutting Depth:1",Shank Diameter:1/4" 03:3/8"x3/8",Cutting Diameter:3/8",Cutting Depth:/1.7",Shank Diameter:3/8" 04:3/16"x1/4",Cutting Diameter:3/16",Cutting Depth:4/5",Shank Diameter:1/4" 05:5/16"x5/16",Cutting Diameter:5/16",Cutting Depth:1",Shank Diameter:5/16" 06:1/8"x1/4",Cutting Diameter:1/8",Cutting Depth:3/4",Shank Diameter:1/4" Suit for: HRC: 45 degrees , Helix Angle 30 degrees 4 Flute End Mill Cutter Package Content : 6 x End Mill Usage: --End Mill Bits are used for side milling, end milling, finish machining, etc. --Apply to wood, steel, stainless steel, alloy steel, carbon steel, die steel, tool steel, cast iron, titanium, aluminum, etc. Why Choose AUTOTOOLHOME -- Good quality and reliable brand. -- Within 90 days product quality is not completely satisfied, please CONTACT US, 100% refund. -- 24-hour feedback excellent customer service.

  • Brand: in-tool-home
  • ASIN: B00ZZYJU2U
  • UPC: 798154046462
  • Sutemribor High Speed Steel HSS 4 Flute Straight End Mill Cutter (1/4 BUY NOW

    Sutemribor High Speed Steel HSS 4 Flute Straight End Mill Cutter

    Features: Adapt to several kinds of cooling conditions, for example oil mist, air cooling Full grinded cutter offer obtain accuracy and fine finish than other substrates Please adjust the speed, feed and cutting depth according to actual cutting conditions Make sure work piece and machine are stable, use hydraulic chucks, high quality collet chucks, or shrink fit chucks Tool overhang, please use the required amount of minimum size, amount of long overhang is high vibration, turn it to lower the number of feed Widely used in hardness from aluminium, cast iron, brass, copper, magnesium alioy, plastics under HRC32(HRA66),or more processing soft materials

  • Brand: Sutemribor
  • ASIN: B075P3R2J1
  • UPC: 688209823844
  • Titanium Step Drill Bit Set Unibit Reamer Reaming Bits Sheet Metal Plastic PVC Pipe Conduit Hole Cutter Universal Cone Saw 3 HSS Steel 1/4 BUY NOW

    Titanium Step Drill Bit Set Unibit Reamer Reaming Bits Sheet Metal Plastic PVC Pipe Conduit Hole Cutter Universal Cone Saw 3 HSS Steel 1/4" Hex

    These titanium nitride coated step drill bits make drilling and cutting multiple size holes fast and easy. These universal unibit reamer hole cutting drill bits are durable m2 high speed steel (HSS) covered in titanium. 1/4" quick connect shank / quick release / quick change shank.This 3 piece titanium step drill bit set is a Genuine Jenoco Brand Product, and Comes in Jenoco Branded Retail Packaging. It also includes a fabric carry case pouch.This short multi bit unibit set is similar to a round bi metal hole saw cutter; it works on thin metal, such as iron, steel, stainless steel, aluminum, sheet metal, plastic, pvc pipe, conduit, fiberglass, heat duct vent, wood. SAE size universal reamer bit set for reaming holes, deburring, cutting, metal working. Perfect for an electrician (they make a good conduit reamer bit set) or plumber (great as a pvc pipe drill bit set.) This is a multi purpose drill bit set of cone shaped tapered drill bits. Self centering split point tip with two double flute cuts hole fast, clean, and smooth.These metal hole cutter drill bits can ream for a long time and stay sharp. This high speed steel HSS titanium stepped drill bit set is compatible with any impact driver, cordless drill, corded drill, or drill press. Impact ready step drill bit set. These unive...

  • Brand: Jenoco
  • ASIN: B0783Q9HWY
  • UPC: 855814007079
  • In-tool-home 1/8 BUY NOW

    In-tool-home 1/8" X 1/4" HSS 4 Flutes Straight End Mill Cutter Pack of

    Product Name : End Mill;Material : HSS Color : Gray 06:1/8"x1/4",Cutting Diameter:1/8",Cutting Depth:3/4",Shank Diameter:1/4" Suit for: Hardness of metal for above 30 degrees 4 Flute End Mill Cutter Package Content : 2 x End Mills

  • Brand: in-tool-home
  • ASIN: B01098JC60
  • UPC: 714046431222
  • Yaetek 1/16 BUY NOW

    Yaetek 1/16" 1/8" 5/32'' 3/16" 1/4" 5/16" 3/8" 1/2" High Speed Steel HSS 4 Flute Straight Shank Square Nose End Mill Cutter CNC Router Bits Cutting Milling Tools

    Package includes: 8×End Mill Cutter HSS-Al, 4 Flute, Straight Shank, Square Nose. Suitable for CNC data processing center, carved, high-speed machines; Can milling of copper, aluminum, tool steel, cast iron, etc Square Nose Endmills Size: 1/16'' Cutter: Blade Diameter=1/16'', Shank Diameter=1/4'', Flute Length=9/16'', Overall Length=2-3/8''; 1/8'' Cutter: Blade Diameter=1/8'', Shank Diameter=1/4'', Flute Length=7/16'', Overall Length=2-3/8''; 5/32'' Cutter: Blade Diameter=5/32'', Shank Diameter=1/4, Flute Length=1/2'', Overall Length=2-3/8''; 3/16'' Cutter: Blade Diameter=3/16'', Shank Diameter=1/4'', Flute Length=9/16'', Overall Length=2-3/8''; 1/4'' Cutter: Blade Diameter=1/4'', Shank Diameter=1/4'', Flute Length=3/4'', Overall Length=2-1/2''; 5/16'' Cutter: Blade Diameter=5/16'', Shank Diameter=1/4'', Flute Length=9/16'', Overall Length=2-3/8''; 3/8'' Cutter: Blade Diameter=3/8'', Shank Diameter=3/8'', Flute Length=1'', Overall Length=2-3/4''; 1/2'' Cutter: Blade Diameter=1/2'', Shank Diameter=1/2'', Flute Length=1-1/2'',Overall Length=3-3/8''.

  • Color: 8PCS
  • Brand: YaeTek
  • ASIN: B0748DJ3M1
  • UPC: 602989766931
  • 4Pcs 1/4 BUY NOW

    4Pcs 1/4" 3/8" 1/2" 5/8" HSS Wood Plug Cutter Drill Bits for Intercepting Wood

    Specification:Material:45 # carbon steelSize:1/4; Take wood(dia) 6.3mm 3/8; Take wood 9.5mm 1/2; Take wood 12.7mm 5/8; Take wood 15.8mmShank:10mmcan get block up to 27mm.Feature:Carbon steel is durable.Precision production, smooth surface.Caution:suitable for bench, speed not too fast, otherwise will smoke, charred, etc.!Package inckude:4x drill bits

  • Brand: Amon Tech
  • ASIN: B01G84OFMU
  • Flutes End Mill Cutter,1/4 BUY NOW

    Flutes End Mill Cutter,1/4" 1/8" 3/16" 5x HSS CNC End Mill Cutter Milling Machine Cutter Bit Tools

    Specifications: Material: HSS Flutes: Two Flutes Mill diameter: 4mm Shank diameter: 6mm Flute length: 11mm Total length: 55mm Package includes : 1x 2 Flute Ball Nose Mill End

  • Brand: GOTOTOP
  • ASIN: B07DZT9VHR
  • UPC: 763741620837
  • PROLINEMAX 5 Pc 1/4 BUY NOW

    PROLINEMAX 5 Pc 1/4" x 1/4" x 2-1/2" HSS Square Tool Bit Lathe Fly Cutter Mill

    5 Pc 1/4" x 1/4" x 2-1/2" HSS Square Tool Bits Commonly used on a lathe, a milling machine fly cutter or a metal shaper High speed steel tool bits show exceptional results on mild steel, alloys and tools steels Overall Length: 2-1/2" long Weight: 0.8 Ounce Per Bit Overall Dimension: 1/4"L x 1/4"W x 2-1/2"H Quantity: 1 Set ( 5 Pc Per Order)

  • Brand: PROLINEMAX
  • ASIN: B07F3GQV13
  • UPC: 618794227741
  • HHIP 2006-0161 1/4 Inch HSS T-Slot Cutter (Inch Hss 1/4 Cutter) BUY NOW

    HHIP 2006-0161 1/4 Inch HSS T-Slot

    High speed steel. Rugged design with free cutting features. Cutters have positive radial rake, right and left hand spiral with alternate side cutting teeth for maximum chip clearance.

  • Brand: HHIP
  • ASIN: B00N40DI48
  • UPC: 769053006185
  • Ginode 8 pcs 5/8 BUY NOW

    Ginode 8 pcs 5/8" 1/2" 3/8" 1/4" Wood Plug Cutter Tool Drill Bits Set + 6PCS 1/4'' Hex Shank HSS 5 Flute Countersink Drill Bit Set

    ▲8PCS Wood Plug Cutter Tool Drill Bits: ▲Specification: ● Material: 45#Carbon Steel ● Shank: Round shank, shank diameter 9.5mm ● Sizes: 1/4",3/8",1/2",5/8" (6mm/10mm/13mm/16mm) ▲Features: ● Chamfered Cutters Make Tapered plugs To Fill Countersunk Holes. ● Use Standard Cutters To Eliminate Imperfections In Wood. ● The Cutter set Achieves excellent finish when using same timber. ▲6PCS 5 Flute Countersink Drill Bit: ▲Specification: ● Material: High carbon steel ● Hardness: 50 HRC ● Surface treatment:Titanium Coated ● Handle diameter: 1/4 inch hexagonal handle ● Size: 6mm(1/4''), 8mm(5/16''), 9mm(3/8''), 12mm(1/2''), 16mm(5/8''), 19mm(3/4'') ▲Features: ● Polished cutting edge for reduced friction. ● Ideal for DIY, home and general building/engineering using. ● High hardness and sharp, perfect for drilling the extra thick wood. ▲Package includes: ● 4x Straight Drill Bit Cutter. ● 4x Tapered Claw Drill Bit Cutter. ● 6x 5 Flute Countersink Drill Bit.

  • Color: 14pcs
  • Brand: Ginode
  • ASIN: B079M8PKSK
  • UPC: 764560284484
  • DIAOSnx 1/8 BUY NOW

    DIAOSnx 1/8" 5/32'' 3/16" 1/4" 5/16" 3/8" 1/2" High Speed Steel HSS 4 Flute Straight Shank Square Nose End Mill Cutter CNC Router Bits Cutting Milling Tools (Set of

    Package includes: 7×End Mill Cutter HSS-Al, 4 Flute, Straight Shank, Square Nose. Suitable for CNC data processing center, carved, high-speed machines; Can milling of copper, aluminum, tool steel, cast iron, etc Square Nose Endmills Size: 1/8'' Cutter: Blade Diameter=1/8'', Shank Diameter=1/4'', Flute Length=7/16'', Overall Length=2-3/8''; 5/32'' Cutter: Blade Diameter=5/32'', Shank Diameter=1/4, Flute Length=1/2'', Overall Length=2-1/4''; 3/16'' Cutter: Blade Diameter=3/16'', Shank Diameter=1/4'', Flute Length=9/16'', Overall Length=2-1/4''; 1/4'' Cutter: Blade Diameter=1/4'', Shank Diameter=1/4'', Flute Length=3/4'', Overall Length=2-1/3''; 5/16'' Cutter: Blade Diameter=5/16'', Shank Diameter=5/16'''', Flute Length=7/8'', Overall Length=2-4/9''; 3/8'' Cutter: Blade Diameter=3/8'', Shank Diameter=3/8'', Flute Length=1'', Overall Length=2-3/4''; 1/2'' Cutter: Blade Diameter=1/2'', Shank Diameter=1/2'', Flute Length=1-1/2'',Overall Length=3-3/8''. Note: Due to the different measurement methods, the size may have 1-2cm error.

  • Brand: DIAOSnx®
  • ASIN: B01M8KUJJB
  • UPC: 614591220343
  • Yakamoz 8 Pieces HSS Taper Claw Type Wood Plug Cutter Drill Bits 5/8 BUY NOW

    Yakamoz 8 Pieces HSS Taper Claw Type Wood Plug Cutter Drill Bits 5/8" 1/2" 3/8"

    Features: 100%Brand New and High Quality Plug Cutter Set. This set includes 4 standard plug cutters and 4 four-tooth chamfered cutters. Chamfered cutters make tapered plugs to fill countersunk holes. 8 Piece Plug Cutter set Makes perfect plugs for counter-bored holes. The Cutter set Achieves excellent finish when using same timber. Specification : Size :5/8"(wood plug 15.8mm) 1/2"(wood plug 12.7mm) 3/8"(wood plug 9.5mm) 1/4"(wood plug 6.3mm) Shank: Round shank Shank diameter: 9.3mm. Material: 45# Carbon Steel Uses: Suitable for bench drill and hand drill; recommend bench drill; easy-centering. Package Included: 8pcs wood plug cutter Drills

  • Brand: Yakamoz
  • ASIN: B06XGK93XM
  • UPC: 602701876498
  • QLOUNI 6 Pcs Countersink Drill Bit 1/4 BUY NOW

    QLOUNI 6 Pcs Countersink Drill Bit 1/4" Hex Shank 90 Degree HSS 5 Flute Hole Cutter Chamfering Drill Bit 6mm 8mm 9mm 12mm 16mm 19mm for Wood Quick Change

    QLOUNI 90 ° HSS Countersink Bit with 1/4'' hex shank and can be installed on electric drills or electric wrenches with hexagonal interface Professional Countersink Drill Bit Set meet what u need! The countersink provides space for the screw head to sit flush (or below) the surface Five-blade Chamfering with A Groove The countersink drill bits are made of standard high speed steel and super hard titanium coated, and the cutting edge are very sharp which can remove burrs well without leaving scratches. 6 Different Sizes Drill Bit Set HSS Chamfering Cutter contains sizes: 6mm(1/4''), 8mm(5/16''), 9mm(3/8''), 12mm(1/2''), 16mm(5/8''), 19mm(3/4''); handle diameter: 6.35mm (1/4 inch quick change hex shank) Specifications Shape: 5 flute Edge: 90 degrees Material: high speed steel 4241 (for parts with a hardness below 50hrc, such as carbon steel, thin steel plate, insulation board, PVC board, wood, etc.) Package includes 1 x 6mm Drill 1 x 8mm Drill 1 x 9mm Drill 1 x 12mm Drill 1 x 16mm Drill 1 x 19mm Drill

  • Color: Hexagon 5 Flute
  • Brand: QLOUNI
  • ASIN: B076DQZWNS
  • UPC: 611702421354
  • (Imperial Units, not Metric)1/16'' 1/8'' 5/32'' 3/16'' 1/4'' 5/16'' 3/8'' 1/2'' HSS 4 Flute Straight Shank Square Nose End Mill Cutter (8 Pcs) (Hss 1/4 Cutter Inch) BUY NOW

    (Imperial Units, not Metric)1/16'' 1/8'' 5/32'' 3/16'' 1/4'' 5/16'' 3/8'' 1/2'' HSS 4 Flute Straight Shank Square Nose End Mill Cutter (8

    - Material: HSS - 4 Flute, Straight Shank, Square Nose - Suitable for aluminium, cast iron, copper, magnesium alioy, plastics, wood etc Square Nose Endmills Size: 1/16'' Cutter: Blade Diameter=1/16'', Shank Diameter=1/4'', Flute Length=9/16'', Overall Length=2-3/8''; 5/32'' Cutter: Blade Diameter=5/32'', Shank Diameter=1/4, Flute Length=1/2'', Overall Length=2-3/8''; 1/8'' Cutter: Blade Diameter=1/8'', Shank Diameter=1/4'', Flute Length=7/16'', Overall Length=2-3/8''; 3/16'' Cutter: Blade Diameter=3/16'', Shank Diameter=1/4'', Flute Length=9/16'', Overall Length=2-3/8''; 1/4'' Cutter: Blade Diameter=1/4'', Shank Diameter=1/4'', Flute Length=3/4'', Overall Length=2-1/2''; 5/16'' Cutter: Blade Diameter=5/16'', Shank Diameter=5/16'''', Flute Length=7/8'', Overall Length=2-5/8''; 3/8'' Cutter: Blade Diameter=3/8'', Shank Diameter=3/8'', Flute Length=1'', Overall Length=2-3/4''; 1/2'' Cutter: Blade Diameter=1/2'', Shank Diameter=1/2'', Flute Length=1-1/2'',Overall Length=3-3/8''. Note: Due to the different measurement methods, the size may have 1-2cm error. Package includes: 8 x End Mill Cutter

  • Color: Silver
  • Brand: DYWISHKEY
  • ASIN: B071JRLYH7
  • UPC: 688209800807
  • W.L. Fuller 11640250 1/4-Inch Plug Cutter (1/4 Hss Cutter Inch) BUY NOW

    W.L. Fuller 11640250 1/4-Inch Plug

    Big Horn Corporation 19150 1/4" Plug Cutter

  • Brand: WL Fuller
  • ASIN: B001DDWQLE
  • UPC: 766565191507
  • AUTOTOOLHOME 3/16 BUY NOW

    AUTOTOOLHOME 3/16" X 1/4" HSS 4 Flutes Straight End Mill Milling Cutter Pack of

    Product Name : End Mill;Material : HSS Color : Gray 3/16x1/4; Cutting Diameter:3/16''; Cutting Depth:4/5'' ; Shank Diameter:1/4'' Suit for: Hardness of metal for above 30 degrees 4 Flute End Mill Cutter Package Content : 2 x End Mills

  • Brand: in-tool-home
  • ASIN: B010998S1Y
  • UPC: 714046431239
  • Xilko 3Pcs High-Speed Steel Step Drill Bit Set Power Tools Cone Titanium Coated Metal Hole Cutter 1/4 BUY NOW

    Xilko 3Pcs High-Speed Steel Step Drill Bit Set Power Tools Cone Titanium Coated Metal Hole Cutter 1/4" Hex Shank Drive Quick Change

    3Pcs 4-12mm/4-20mm/4-32mm HSS Steel Large Step Cone Titanium Coated Metal Drill Bit Cut Tool Set Hole Cutter Features: Materials and Manufacturing: Made of high-speed titanium-coated steel for long life and durability. Unique step structure, one drill can open various sizes of aperture, a ladder drill to a box bit. HSS (hardness for workpieces below 25 degrees, such as carbon steel, step plate thickness 5mm). Package Included: 3pc Hss Step Cone Drill Bit Titanium Hole Cutter, Set handle: 1/4 "quick change hexagonal handle. Design and smooth cutting: This is a dual-slot design that improves cutting speed and automatically prevents centering, preventing chip walking and smooth removal. Easy to use and widely used: Hexagonal shank titanium alloy drills are suitable for the processing of various materials, steel plates, aluminum, copper, stainless steel, plastic boxes and chassis. Detailed size: 4-12mm (4mm, 6mm, 8mm, 10mm, 12mm) 4-20mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm) 4-32mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm,30mm,32mm) About us: The product with the best price/performance ratio; Our shop provides you with the best quality products and best prices; If you have any questions, please contact us to solve and make you satisfied...

  • Brand: Xilko
  • ASIN: B074NNZR4L
  • UPC: 686560759482

TOP 1/4 Inch Hss Cutter Results

NextDealAddict offers best deals for 1/4 Inch Hss Cutter


Customers who bought 1/4 Inch Hss Cutter also bought Mesh Drawstring Bag, Essential Nursing Tank, Set Stacking Bookcase - you may also be interested in these popular items.